Shinko Controller

Temperature controller & PID controller are an instruments used to control temperature. The temperature controller takes an input from a temperature sensor and has an output that is connected to a control element. Different Types of Controllers are available such as On-Off Controllers On-Off Controllers, Autotune PID Controllers, Multiloop Controllers and Safety Limit Controllers.

Compact 22.5mm(W) x 75mm(H) x 100mm(D)
Controller can be easily installed on a DIN rail inside the control panel.
Multi-input, High sampling speed
Total 18 types of input and 0.25 sec of high sampling speed allow you to deal with various processes
Thermocouple (10 types), RTD (2 types), DC current (2 types), DC voltage (4 types )
Shinko protocol, Modbus protocol (ASCII, RTU) are selectable. Monitoring software is also provided.

10 steps/pattern x 10 patterns programmable
Fuzzy overshoot prevention PID Fuzzy algorithms make step changes more accurate.
Multi-input, multi-function Specification setting and changes can be easily performed with multi-range
input and multi-function.

Multi-input Thermocouple (10 types), RTD (2 types)
Direct current (2 types) and DC voltage (4 types)
SV1/SV2 external selection can be switched by external contact.
(Optional for the BCS2)
Communication function for Shinko protocol, Modbus protocol (ASCII and RTU mode) is available.

10-step/pattern, 10 patterns (10 steps per pattern) are available for program control.
Using pattern link function, up to 100 steps of program control can be carried out.
The communication options can be selected from 5 types: Shinko protocol, Set value digital
transmission, Set value digital reception, Modbus ASCII mode, Modbus RTU mode.
If Set value digital transmission is selected, the SV of the controller can be transmitted to the Digital
indicating controllers with serial communication option.